• Standard design pressure 12 bar or 15 bar; higher pressures on request.

• Modern in design and high efficiency, these generators are designed and manufactured in compliance with the European Directive 2014/68/EU (PED) and the most recent national and European standards regarding pressure vessels.

• Combustion chamber consisting of a large hearth, reinforced with omega joints, to guarantee use at low thermal loads.

• Tube bundle on the second and third flue gas pass, with a high exchange surface area.

• Thanks to adequate insulation of the boiler body carried out with a layer of high-density mineral wool, dispersion towards the environment is very limited.

• Large inspection doors both in the front part, for reversing the fumes from the second to the third pass, and in the rear part for collecting the fumes.

• Inspection on the water side is guaranteed by a manhole on the top of the boiler and a handhole on the lower part.

• Rear manhole for fireplace inspection.

• The welding of the pressurized parts is all carried out by qualified personnel approved according to EN standards.

• Rear flue gas box completely lined with high density mineral wool mat.

• Walkable upper platform .

CERTIFICATIONS

CE marking according to the Directives

Pressure vessels (2014/68/EU)

Low Voltage ( 2014/35/EU)

Electromagnetic Compatibility (2014/30/EU)

ACCESSORIES ON REQUEST

• Control panel with PLC for specific communication needs with BMS or supervision systems.

• Instrument holder capable of accommodating all the boiler regulation and safety instruments, available in various configurations.

• Economizer : it is a water-flue gas heat exchanger that allows for an increase in efficiency of up to 4%. Its configuration and positioning are carried out according to the customer's needs.

• Economizer connection complete with return pipe extension, circulation pump with shut-off valves and mechanical connection to the economizer made in our factory.

• System for operation without continuous supervision for up to 24 hours.

• System for operation without continuous supervision for up to 72 hours.

• Burner : brand and type according to customer specifications.

• Ladder and walkway for safe access to the walkable platform above the boiler.

• Vertical chimney connection.

• Pressurized expansion vessel.

• FAIL SAFE minimum level probes.

• “MODULE F” certification.

• The control system consists of a PLC equipped with a high-performance color Touch Panel operator interface. The interface allows you to supervise the operation of the Boiler-Burner-System assembly.